1. Check the amount of coolant in the reserve tank.
2. If the coolant level is below the MIN mark,
add the specified coolant until it reaches
the MAX mark. |
Honda Odyssey Service Manual > Wheels/Tires: Wheel Runout Inspection
Raise and support the vehicle. Check for bent or deformed wheels. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. Front and rear wheel axial runout: Standard: Steel wheel: 0-0.7 mm (0.0-0.028 in) Aluminum wheel: 0-0.3 mm (0-0.012 in) Service limit: 2.0 mm (0.079 in ...