Honda Odyssey Owners Manual: Wear Indicators

Honda Odyssey Owners Manual / Maintenance / Checking and Maintaining Tires / Wear Indicators

The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire.

Worn out tires have poor traction on wet roads.

High speed driving
We recommend that you do not drive faster than the posted speed limits and conditions allow. If you drive at sustained high speeds (over 99 mph or 160 km/h), adjust the cold tire pressures as shown below to avoid excessive heat build up and sudden tire failure.

DOT Tire Quality Grading (U.S. Vehicles)

Tire Service Life, Tire and Wheel Replacement

See More:

Honda Odyssey Service Manual > Gauges: Gauge Control Module Replacement
NOTE: Before replacing the gauge control module, retrieve the ODO data from the gauge control module with the HDS. Turn the ignition switch to LOCK (0). Remove the instrument visor. Remove the three screws from the gauge control module (A). BA Disconnect the 32P connector (B) from the gauge control ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

0.0053