Honda Odyssey Service Manual: Steering Lock Replacement (With Keyless Access)

Honda Odyssey Service Manual / Accessories / Security & Keyless Entry / Keyless Security System / Steering Lock Replacement (With Keyless Access)

  1. Remove the steering column.

  1. Center-punch both of the shear bolts (A), and drill their heads off with a 5.0 mm (0.197 in) drill bit. Be careful not to damage the steering lock (B) when removing the shear bolts.

  2. AB
  3. Remove the shear bolts from the steering lock, then remove the steering lock.


  1. Install the steering lock.

  1. Loosely tighten the new shear bolts.

  1. Tighten the shear bolts (A) until the hex heads (B) twist off.

  2. AB
  3. Install the steering column.

  4. Do the keyless access system registration.

    Sliding Door Outer Handle Replacement (With Keyless Access)

    Under-Dash Subrelay Box Test/Replacement (With Keyless Access)

    See More:

    Honda Odyssey Service Manual > Lane Departure Warning: FCW/LDW Camera Unit Aiming
    Special Tools Required Honda Diagnostic System (HDS) TDSGDS2200 Service Point Calibration (SPC) The FCW/LDW camera must be re-aimed whenever the FCW/LDW camera unit is removed or replaced, or the windshield is removed or replaced, or if an aiming error occurs. The FCW indicator comes on if the aimin ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2019 Copyright www.hodyssey.net
    0.0154