Honda Odyssey Service Manual: HID Unit Replacement

  1. Turn the combination light switch OFF.

  1. Make sure the ignition switch is in LOCK (0) position, then do the battery terminal disconnection procedure.

  1. Remove the headlight assembly.

  1. Remove the three mounting screws and the HID unit (A).

  2. BCA
  3. Disconnect the 4P connector (B) from the HID unit.

  4. Inspect the gasket (C) for damage. If damaged, replace it.

  5. Install the HID unit in the reverse order of removal.

  6. Do the battery terminal reconnection procedure.

  1. After replacement, adjust the headlights.

    HID Bulb Replacement

    Headlight Adjustment

    See More:

    Honda Odyssey Service Manual > Ergonomic Settings: Driving Position Memory Switch Test/Replacement
    Remove the driver's door panel. Disconnect the 10P connector (A) from the driver's position memory switch (B). 6 5 4 3 2 1 10 9 8 7 AB Remove the two screws, then remove the switch from the door panel. Check for continuity between the terminals in each switch position according to the table. NOTE: M ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.019