Honda Odyssey Service Manual: Center Display Lens Removal/Installation

Honda Odyssey Service Manual / Body / Driver Info & Control / Center Display Lens Removal/Installation

NOTE:

  • Do this procedure in a clean place free from dirt and dust.

  • Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).

  • When removing the center display lens, do not touch the LCD facing.

  • If there is dirt on the LCD facing, blow it clean with compressed air.

  • When installing the center display lens onto the LCD assembly, be careful not to touch the LCD facing.

  • Check that the center display lens and the LCD assembly are properly installed.

  • Check that the center display unit assembly has no damage.

  • When removing the center display lens, do not hold the LCD facing down.

  1. Remove the center display unit.

  1. Remove the screws and the LCD assembly (A) from the center display lens (B).

  2. AB
  3. Install the center display lens reverse order of removal.

    Driver Info & Control

    Compass

    See More:

    Honda Odyssey Service Manual > Alternator Overhaul: Alternator Brush Inspection
    Measure the length of both brushes (A) with a vernier caliper (B): If either brush is shorter than the service limit, replace the brush holder assembly. If the brush length is OK, go to step 14. Alternator Brush Length Standard (New): 10.5 mm (0.413 in) Service Limit: 1.5 mm (0.059 in) BA ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.006