Honda Odyssey Service Manual: Front Seat Armrest Replacement

Honda Odyssey Service Manual / Body / Body Interior / Front Seat Armrest Replacement

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

Normal

NOTE:

  • Take care not to tear or damage the seat covers.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the armrest (A).

    1. Remove the cap (B) with the appropriate trim tool.

    1. Remove the armrest center bolt (C) and the wave washer (D).

    1. If necessary, remove the bushings (E) or the center pin (F).

  2. BADEC10 x 1.2547 N·m(4.8 kgf·m,35 lbf·ft)F10 x 1.2547 N·m(4.8 kgf·m,35 lbf·ft)E
  1. Install the armrest in the reverse order of removal, and note these items:

    • Make sure the bushings are installed properly.

    • Make sure the cap is installed correctly.


Adjustable

NOTE:

  • Take care not to tear or damage the seat covers.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the armrest (A).

    1. Remove the cap (B) with a trim tool.

    1. Remove the armrest center bolt (C), then remove the armrest.

  2. BAC10 x 1.2520 N·m(2.0 kgf·m,15 lbf·ft)
  1. Install the armrest in the reverse order of removal, and make sure the cap is installed correctly.

    Body Interior

    Second Row Center Seat-Back Armrest Beverage Holder Replacement

    See More:

    Honda Odyssey Service Manual > Gauges: Gauge Control Module Replacement
    NOTE: Before replacing the gauge control module, retrieve the ODO data from the gauge control module with the HDS. Turn the ignition switch to LOCK (0). Remove the instrument visor. Remove the three screws from the gauge control module (A). BA Disconnect the 32P connector (B) from the gauge control ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2021 Copyright www.hodyssey.net
    0.0129