Honda Odyssey Service Manual: Front Floor Tray Removal/Installation

Honda Odyssey Service Manual / Body / Body Interior / Front Floor Tray Removal/Installation

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to damage, wrinkle or twist the carpet.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the detachable console.

  1. Release the hooks (A) (eight places), then remove the front floor tray cap (B).

  2. BA(Eight places)
  1. Remove the bolts, then remove the front floor tray (A).

  2. ? : Bolt, 4Fastener LocationsA6 x 1.0 mm9.4 N·m(0.96 kgf·m, 6.9 lbf·ft)
  1. Install the tray in the reverse order of removal, and push the hooks into place securely.

    Second Row Center Seat-Back Armrest Beverage Holder Replacement

    Front Door Sash Outer Trim Replacement

    See More:

    Honda Odyssey Service Manual > Seat Belts: Retractor
    Before installing the retractor, check that the seat belt can be pulled out freely. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock when the retractor is leaned over 40 °. Do not attempt to disassemb ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.009