Honda Odyssey Service Manual: Dashboard Passenger's Middle Panel Removal/Installation

Honda Odyssey Service Manual / Body / Body Interior / Dashboard Assembly / Dashboard Passenger's Middle Panel Removal/Installation

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Take care not to scratch the dashboard or the related parts.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the passenger's dashboard side lid.

  1. Pull out the passenger's middle panel (A) to detach the clips and to release the hook (B), then remove it.

  2. Fastener Locations? : Clip, 12AB
  3. Install the panel in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips and the hook into place securely.

    Dashboard Driver's Middle Panel Removal/Installation

    Dashboard/Steering Hanger Beam Removal/Installation

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: BSI Control Unit Removal/Installation
    Remove the left rear side trim panel. Remove the BSI control unit (A). Disconnect the BSI control unit 16P connector (B) and detach the harness clip (C). Remove the bolt. BCA9.4 N·m(0.96 kgf·m,6.9 lbf·ft) Install the BSI control unit in the reverse order of removal. ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2020 Copyright www.hodyssey.net
    0.0208