Honda Odyssey Service Manual: Instrument Visor Removal/Installation

Honda Odyssey Service Manual / Body / Body Interior / Dashboard Assembly / Instrument Visor Removal/Installation

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Take care not to scratch the dashboard or the related parts.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove these items:

    • Center panel

    • Driver's vent panel

  1. Adjust the steering column to the full tilt down position and to the full telescopic out position.

  1. Gently pull out the instrument visor (A) to detach the clips (B, C), then remove it.

  2. Fastener LocationsB ? : Clip, 4ABC ? : Clip, 6BBBCCCCCC
  3. Install the visor in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips into place securely.

    Passenger's Dashboard Undercover Removal/Installation

    Glove Box Lock Cylinder Replacement

    See More:

    Honda Odyssey Service Manual > Data and Communication Network: BSI Control Unit Removal/Installation
    Remove the left rear side trim panel. Remove the BSI control unit (A). Disconnect the BSI control unit 16P connector (B) and detach the harness clip (C). Remove the bolt. BCA9.4 N·m(0.96 kgf·m,6.9 lbf·ft) Install the BSI control unit in the reverse order of removal. ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0087