Honda Odyssey Service Manual: Retractor

Honda Odyssey Service Manual / Body / Restraints / Seat Belts / Retractor

  1. Before installing the retractor, check that the seat belt can be pulled out freely.

  1. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock when the retractor is leaned over 40 °. Do not attempt to disassemble the retractor.

    2. Front

    40 °15 °40 °15 °InsideFront40 °15 °40 °15 °A6 °A

    Second row

    40 °15 °40 °15 °InsideFront40 °15 °40 °15 °A 12 °A

    Third row

    40 °15 °40 °15 °InsideFront40 °15 °40 °15 °A26 °A

    Second row center/Third row center

    40 °15 °40 °15 °InsideFront40 °15 °40 °15 °A9 °A

  2. Replace the seat belt with a new assembly if there is any abnormality. Do not disassemble any part of the seat belt for any reason.


    Seat Belts

    In-Vehicle

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
    Remove the hub bearing unit. Remove the flange nuts (A), then remove the backing plate (B) with the parking brake shoe assembly. To prevent damage to the backing plate with the parking brake shoes assembly and parking brake cable, use a short piece of wire to hang the backing plate from the undercar ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.1159