LaneWatch may reduce the driver's blind spot by capturing the image by the LaneWatch camera mounted under the passenger's power mirror. The image is displayed on the center display when the turn signal is activated to the passenger's side or the LaneWatch switch is pressed. Reference line The LaneWatch image is provided with the three reference lines, each line shows the distance from the rear bumper. |
Honda Odyssey Service Manual > Front Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
Remove the hub bearing unit. Remove the wheel speed sensor (A) from the knuckle (B). Do not disconnect the wheel speed sensor connector. AB6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Remove the cotter pin (A) from the tie-rod end ball joint, then remove the nut (B). NOTE: During installation, inst ...