Honda Odyssey Service Manual: Rear Fuse Box (Rear MICU) Removal and Installation

Honda Odyssey Service Manual / Electrical / Data and Communication Network / Rear Fuse Box (Rear MICU) Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations, and precautions and procedures   before doing repairs or servicing.

Removal

  1. Do the battery terminal disconnection procedure.

  1. Remove the left rear side trim panel.

  1. Disconnect the connectors from the rear fuse box (A).

  2. ABB
  3. Remove the mounting bolts (B), then remove the rear fuse box.


Installation

  1. Connect the connectors to the rear fuse box, then install the rear fuse box in the reverse order of removal.

  1. Install the removed parts in the reverse order of removal.

  1. Do the battery terminal reconnection procedure.

  1. Confirm that all systems work properly.

    Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (USA model)

    Fuses Junctions and Relays

    See More:

    Honda Odyssey Owners Manual > Information: Devices that Emit Radio Waves
    The following products and systems on your vehicle emit radio waves when in operation. Each of the above complies with the appropriate requirements or the required standards of FCC (Federal Communications Commission) and Industry Canada Standard, described below: As required by the FCC: This device ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.008