The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems. HomeLink® is a registered trademark of Johnson Controls., Inc. Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an “electronic eye,” or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it. ■Important Safety Precautions Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer. Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage. When programming a garage door opener, park just outside the garage door’s path. Training HomeLink If you have not trained any of the buttons in
HomeLink before, you should erase any
previously learned codes. To do this: ■Training a Button Retraining a Button Erasing Codes If you have any problems, see the device’s instructions, visit www.homelink.com, or call HomeLink at (800) 355-3515. |
Honda Odyssey Owners Manual > Safety of Infants and Small Children: Installing a Child Seat with a Lap/Shoulder Seat Belt
1. Place the child seat on the vehicle seat. 2. Route the seat belt through the child seat according to the seat maker's instructions, and insert the latch plate into the buckle. ► Insert the latch plate fully until it clicks. 3. Slowly pull the shoulder part of the belt all the way out until ...