Honda Odyssey Owners Manual: Compass Calibration

Honda Odyssey Owners Manual / Features / Compass / Compass Calibration

If the compass indicates the wrong direction, or the compass display blinks, you need to manually calibrate the system.

1. Turn the ignition switch to ON .
2. Press and hold the SETUP button until the display shows the compass setting menu list.
3. Rotate to select Calibration, then press .

4. When the display changes to Start Calibration, press .
5. Drive the vehicle slowly in two circles.
► The compass starts to show a direction after the calibration. The CAL indicator goes off.

Calibrate the compass in an open area.

While setting the compass:
• The RETURN button returns to the previous screen.
• The SETUP button cancels the setting mode.

    Compass

    Compass Zone Selection

    See More:

    Honda Odyssey Service Manual > Storage: HondaVAC
    Basic OperationThis system is composed of the rear MICU, the HondaVAC switch, the HondaVAC motor, the HondaVAC motor relay, and the keyless buzzer. The rear MICU controls the HondaVAC motor relay based upon one or more of the following conditions: Vehicle ignition mode Transmission range switch P p ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0053