Honda Odyssey Owners Manual: Compass Zone Selection
1. Turn the ignition switch to ON
2. Press and hold the SETUP button until the display shows the compass setting menu list.
3. Rotate
4. Rotate
The zone selection is done to compensate the variation between magnetic north and true north. If the calibration starts while the audio system is in use, the display returns to normal after the calibration is completed, |
.
to select Zone Adjust,
then
press 
. The display shows the
current
zone number.
to select the zone number
of
your area (See Zone Map), then press
.
See More:
Honda Odyssey Service Manual > Moonroof Frame and Drain Tube Replacement: Frame Replacement
Remove the headliner. Disconnect the front drain tubes (A) and the rear drain tubes (B). Detach the tube clip (C). AABBC With an assistant holding the frame (A), remove the bolts, then remove the frame. Fastener Locations? : Bolt, 8A6 x 1.0 mm9.4 N·m(0.96 kgf·m, 6.9 lbf·ft) ...
Honda Odyssey Owners Manual
- Quick Reference Guide
- Safe Driving
- Instrument Panel
- Controls
- Features
- Driving
- Maintenance
- Handling the Unexpected
- Information
Honda Odyssey Service Manual
