1. Check the amount of coolant in the reserve tank.
2. If the coolant level is below the MIN mark,
add the specified coolant until it reaches
the MAX mark. |
Honda Odyssey Service Manual > VSA Modulator-Control Unit Removal and Installation: Removal
Turn the ignition switch to LOCK (0). Remove the air cleaner. Disconnect the 10 mm brake lines (A) and the 12 mm brake lines (B) from the VSA modulator-control unit (C). CA10 x 1.0 mmB12 x 1.0 mmA10 x 1.0 mm Disconnect the VSA modulator-control unit 32P connector (A) by pushing the lock ...