Honda Odyssey Owners Manual: Changing the Wiper Blade Rubber

1. Lift the driver side wiper arm first, then the passenger side.

2. Press and hold the tab, then slide the blade from the wiper arm.

NOTICE

Avoid dropping the wiper arm; it may damage the windshield.

3. Slide the wiper blade out from its holder by pulling the tabbed end out.

4. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

5. Slide the new wiper blade onto the holder from the bottom end.
►  The tab on the holder should fit in the indent of the wiper blade.
6. Slide the wiper blade onto the wiper arm until it clicks.
7. Lower the passenger side wiper arm first, then the driver side.

    Checking and Maintaining Wiper Blades

    Changing the Rear Wiper Blade Rubber

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: VSA Modulator-Control Unit Removal and Installation
    notice Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water. NOTE: Be careful not to damage or deform the brake lines during removal and installation. To prevent the brake fluid from dripping, plug and cover the hose ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0051