Honda Odyssey Service Manual: RDS-TMC Antenna Amplifier Replacement

Honda Odyssey Service Manual / Accessories / Antenna / RDS-TMC Antenna Amplifier Replacement

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures   before doing repairs or service.

  1. Remove the left C-pillar trim.

  1. Disconnect the connector (A) from the RDS-TMC antenna and the connector (B) from the RDS-TMC antenna amplifier (C).

    2. ACD 6 x 1.0 mm 9.4 N·m (0.96 kgf·m, 6.9 lbf·ft)B

  2. Remove the bolt (D) and the RDS-TMC antenna amplifier.

  3. Install the RDS-TMC antenna amplifier in the reverse order of removal.

    Keyless Access LF Antenna (Rear Interior) Replacement

    XM Antenna Replacement

    See More:

    Honda Odyssey Service Manual > Body Exterior: Front Bulkhead Cover Replacement
    NOTE: Take care not to scratch the front bumper or the body. When prying with a flap-tip screwdriver, wrap it with protective tape to prevent damage. Remove the air intake scoop. Detach the clips, then remove the front bulkhead cover (A). NOTE: To release the clips, pry up on the center pin at the n ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0065