Honda Odyssey Service Manual: Without Navigation

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the tailgate and related parts.

  1. Remove the tailgate lower trim panel   and the rear license trim.

  1. Disconnect the connectors (A), and detach the harness clips.

  2. BAA
  3. Remove the nuts, and the rearview camera assembly (B).

  1. Remove the screws and the rearview camera (A).

  2. A
  3. Install the rearview camera in the reverse order of removal.

    Rearview Camera Removal/Installation (Without Navigation)

    Blind Spot Monitor

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: Suspension Stroke Sensor Replacement
    Raise the vehicle, make sure it is securely supported. Disconnect the 3P connector (A) from the suspension stroke sensor (B). Front ABDo not disassemble.D9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Replace.C Rear A9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Do not disassemble.BCD Remove the bolt(s) (C) and the nut (D), the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0065