Honda Odyssey Service Manual: FCW/LDW Camera Unit 10P Connector Inputs and Outputs

Honda Odyssey Service Manual / Accessories / Driver Assist / Lane Departure Warning / FCW/LDW Camera Unit 10P Connector Inputs and Outputs

1 2 3 4 5 6 7 8 9 1 0 Wire side of female terminalsFCW/LDW CAMERA UNIT 10P CONNECTOR

Terminal
number

Wire color

Terminal
name

Description

Signal

1

WHT

LDW SW

Detects LDW OFF switch signal

Vehicle in ON mode: Battery voltage
Vehicle in OFF mode: About 0 V

2

GRN

IG1 METER

Power supply for the FCW/LDW camera unit

Vehicle in ON mode: Battery voltage
Vehicle in OFF mode: About 0 V

5

BLK

F-CAN L

F-CAN communication (low) circuit

???

6

WHT

F-CAN H

F-CAN communication (high) circuit

???

7

PUR

LDW SW IND

Drive LDW OFF switch circuit

LDW OFF switch pressed: About 0 V

8

GRN

+B BACK UP

Power supply for backup memory

Battery voltage

10

BLK

GND

Ground circuit for the FCW/LDW camera unit

Less than 0.2 V at all times

    Lane Departure Warning (LDW) System

    LaneWatch   System

    See More:

    Honda Odyssey Service Manual > Rear Spring/Bump Stop Removal/Installation: Installation
    Install the bump stop (A) to the body if removed. 10 x 1.25 mm44 N·m (4.5 kgf·m, 32 lbf·ft)A Install the spring (A), spring mounting cushion (C), and the lower spring seat (D). Align the bottom of the spring with the stepped part of the lower spring seat and lower arm B as shown. ABABCDD Positio ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0107