Honda Odyssey Service Manual: With Touch Screen

NOTE:

  • When working on electronic components, make sure the work area is clean and dust free.

  • Make sure your hands are clean and free of oils and grease.

  • Take care not to scratch the dashboard and related parts.

  • Eject the disc before removing the audio unit to prevent damaging the CD player's load mechanism.

  • Make sure you have the 5-digit anti-theft code.

  1. Remove the center middle panel.

  1. Remove the passenger's middle panel.

  1. Remove the center panel.

  1. Remove the center lower console.

  1. Remove the bolts (B) and the bolts (C), then pull the audio unit assembly (D) out.

  2. DB5 x 0.8 mm 4.4 N
    Audio Unit Removal/Installation (With Touch Screen)

    Audio-Navigation Unit Removal/Installation

    See More:

    Honda Odyssey Service Manual > Front Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
    Remove the hub bearing unit. Remove the wheel speed sensor (A) from the knuckle (B). Do not disconnect the wheel speed sensor connector. AB6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Remove the cotter pin (A) from the tie-rod end ball joint, then remove the nut (B). NOTE: During installation, inst ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0103