Honda Odyssey Service Manual: Navigation Display Visor Removal/Installation

Honda Odyssey Service Manual / Accessories / Navigation and Telematics / Navigation Display Visor Removal/Installation

NOTE:

  • Do this procedure in a clean place free from dirt.

  • Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).

  • When removing the navigation display visor, do not touch the LCD facing.

  • If there is dirt on the LCD facing, clean it using compressed air.

  • When installing the navigation display visor onto the LCD assembly, be careful not to touch the LCD facing.

  • Check that the navigation display visor and the LCD assembly are properly installed.

  • Since the LCD assembly and the navigation display visor are installed at an angle, be sure that the screws are properly seated. If not properly seated, tighten the screws.

  • Check that the navigation display unit assembly has no damage.

  • When removing the navigation display visor, do not hold the LCD facing down.

  1. Remove the navigation display unit.

  1. Remove the screws and the LCD assembly (A) from the navigation display visor (B).

  2. AB
  1. Remove the screws (A) and the front passenger's airbag cutoff indicator (B) from the navigation display visor (C).

  2. ABC
  3. Install the navigation display visor reverse order of removal.

    HDD Removal/Installation

    Navigation System Symptom Troubleshooting - Rearview camera image does not change when selecting different views

    See More:

    Honda Odyssey Service Manual > Body Exterior: Roof Molding Replacement
    Special Tools Required KTC Trim Tool Set SOJATP2014 *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: Take care not to scratch the body. The steel core in the roof molding can not be restored to its original shape once it is bent. Replace the roof molding if the steel ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0072