Honda Odyssey Service Manual: Hazard Warning Switch Test/Replacement

Honda Odyssey Service Manual / Body / Body Electrical / Lighting / Day Time Running Lights System Description / Hazard Warning Switch Test/Replacement

  1. Remove the center panel.

  1. Remove the two screws and the hazard warning switch (A).

    2. 1 2 3 4 5 A

  1. Check for continuity between the terminals in each switch position according to the table.

    2. TerminalPositionONOFF1245

  1. If the continuity is not as specified, remove the covers (A), then check the bulb (B). If the bulb is OK, replace the switch assembly.

    2. BAA

  1. Install the switch in the reverse order of removal.

    Day Time Running Lights System Description

    Side Turn Signal Light Replacement

    See More:

    Honda Odyssey Owners Manual > Replacing Light Bulbs: Rear License Plate Light Bulbs
    When replacing, use the following bulbs. Rear License Plate Light: 5 W 1. Remove the cover by prying on the edge of the cover using a flat-tip screwdriver. ►  Wrap the flat-tip screwdriver with a cloth to prevent scratches. 2. Remove the license plate light assembly by squeezing the tabs ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0081