Honda Odyssey Service Manual: License Plate Light Replacement

Honda Odyssey Service Manual / Body / Body Electrical / Lighting / Headlight Leveling Motors / License Plate Light Replacement

  1. Remove the tailgate lower trim panel.

  1. Push the license plate light (A) to the side to release the retaining spring, and pull out the license plate light.

    2. A

  1. Disconnect the 2P connector (A) from the light.

    License Plate Light:5 W
    2. ABCD

  2. Separate the lens (B) and the housing (C), then remove the bulb (D).

  3. Install the license plate light in the reverse order of removal.

    Sunlight Sensor Replacement (With Climate Control)

    Combination Light Switch Test/Replacement

    See More:

    Honda Odyssey Service Manual > Doors and Enclosures: Hood Assembly
    Hood Release Handle Replacement NOTE: Take care not to kink the hood opener cable. Remove the driver's kick panel. Remove the bolts, then remove the hood release handle (A). 6 x 1.0 mm9.3 N·m(0.95 kgf·m,6.9 lbf·ft)ABFastener Locations? : Bolt, 2 Disconnect the hood opener cable (B). Install the h ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0092