Honda Odyssey Service Manual: Sliding Door Latch Remote Control Assembly Replacement

Honda Odyssey Service Manual / Body / Doors and Enclosures / Doors / Sliding Door Latch Remote Control Assembly Replacement

NOTE: Put on gloves to protect your hands.

  1. Remove the door panel.

  1. Remove the latch remote control assembly (A) from the door.

    1. Disconnect the remote control assembly connectors (B).

    1. Release the cable holders (C), and disconnect the outer handle cable (D), the lower roller cable (E), the front latch cable (F), and the rear latch cable (G).

    1. Remove the bolts (H) and the screw (I).

    1. Detach the harness clip (J), and release the hook (K).

  2. CCIEHCBJFHGDFastener LocationsH ? : Bolt, 3I ? : Screw, 16 x 1.0 mm9.4 N·m(0.96 kgf·m, 6.9 lbf·ft)J ? : Clip, 1BCAKH????????
  1. Release the cable holder (A), and disconnect the failsafe lever cable (B) from the latch remote control assembly (C).

  2. BAC
  1. If necessary, release the hook (A), then remove the latch remote control assembly cover (B).

  2. BA
  3. Install the latch remote control assembly in the reverse order of removal, and note these items:

    • Make sure each connector is plugged in properly, and each cable is routed properly and connected securely.

    • Take care not to bend any of the cables.

    • Make sure the door locks and opens properly.

    Resetting the Power Sliding Door Control Unit/Re-Homing the Power Sliding Doors

    Sliding Door Assembly

    See More:

    Honda Odyssey Service Manual > Restraints Control: LaneWatch Camera   Inputs and Outputs
    4 5 6 1 2 3 LANEWATCH CAMERA 6P CONNECTORTerminal side of female terminals Terminal number Wire color Terminal name Description Signal 1 WHT BSM CAM SH Shield for terminals No. 2, No. 3, No. 4, No. 5, and No. 6 Less than 0.2 V at all times 2 ORN BSM COM1 Communication signal for LaneWatch camera ?? ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0096