Honda Odyssey Service Manual: Vertical Adjustment at the Front

Honda Odyssey Service Manual / Body / Doors and Enclosures / Doors / Vertical Adjustment at the Front

  1. Adjust the lower roller (A).

    1. Remove the roller maintenance cap (B).

    1. Slightly loosen the lower roller bolts (C).

    1. Move the door up or down to equalize the gaps.

    1. Tighten all bolts securely, and reinstall the cap.

    2. ABC8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)
    Sliding Door Assembly

    Horizontal Adjustment at the Front

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Third) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the rear side trim panel. Disconnect the side impact sensor (third) 4P connector (A) on the left or right side wire harness. Left side ABC Right side ABDC Remove the TORX bolt (B) using ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0099