Honda Odyssey Service Manual: Horizontal Adjustment at the Front

Honda Odyssey Service Manual / Body / Doors and Enclosures / Doors / Horizontal Adjustment at the Front

  1. Adjust the upper roller (A) and the lower roller subbase (B).

    1. Slightly loosen the upper roller bolts (C).

    1. Slightly loosen the lower roller subbase bolts (D) with TORX T40 bit.

    1. Move the door in or out until it is flush with the body.

    1. Tighten all bolts securely.

    2. ABD8 x 1.25 mm30 N·m(3.1 kgf·m, 22 lbf·ft)C8 x 1.25 mm30 N·m(3.1 kgf·m, 22 lbf·ft)
    Vertical Adjustment at the Front

    Vertical and Horizontal Adjustment at the Rear

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
    Remove the hub bearing unit. Remove the flange nuts (A), then remove the backing plate (B) with the parking brake shoe assembly. To prevent damage to the backing plate with the parking brake shoes assembly and parking brake cable, use a short piece of wire to hang the backing plate from the undercar ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0092