Honda Odyssey Service Manual: Special Tools Required

Honda Odyssey Service Manual / Body / Doors and Enclosures / Doors / Vertical and Horizontal Adjustment at the Rear / Special Tools Required

  • KTC Trim Tool Set SOJATP2014

    • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the door.

  • Take care not to damage the door glass outer weatherstrip.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the sliding door upper molding.

  1. Pull the top of the door rear sash outer trim (A) to detach the clips, and release the trim from between the door glass outer weatherstrip (B) and the door, then remove the trim.

    2. Fastener LocationsAB? : Clip, 5??

  2. Install the trim in the reverse order of removal, and push the clips into place securely.

    Vertical and Horizontal Adjustment at the Rear

    Sliding Door Subseal Replacement

    See More:

    Honda Odyssey Service Manual > Headlight Leveling Motors: Sunlight Sensor Replacement (With Climate Control)
    From the notch (A), carefully pry the front center speaker grille (B) out with a small screwdriver, then disconnect the connector(s). Be careful not to damage the front center speaker grille and the dashboard. ABC Remove the sunlight sensor (C) from the front center speaker grille. Install the sens ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0073