Remove the latch remote control assembly (A) from the door.
Disconnect the remote control assembly connectors (B).
Release the cable holders (C), and disconnect
the outer handle cable (D), the lower roller cable (E), the front latch
cable (F), and the rear latch cable (G).
Remove the bolts (H) and the screw (I).
Detach the harness clip (J), and release the hook (K).
Release the cable holder (A), and disconnect the failsafe lever cable (B) from the latch remote control assembly (C).
If necessary, release the hook (A), then remove the latch remote control assembly cover (B).
Install the latch remote control assembly in the reverse order of removal, and note these items:
Make sure each connector is plugged in properly, and each cable is routed properly and connected securely.
Honda Odyssey Service Manual > Storage: HondaVAC
Basic OperationThis system is composed of the rear MICU, the HondaVAC switch, the HondaVAC motor, the HondaVAC motor relay, and the keyless buzzer. The rear MICU controls the HondaVAC motor relay based upon one or more of the following conditions: Vehicle ignition mode Transmission range switch P p ...