Honda Odyssey Service Manual: Hood Assembly

Hood Release Handle Replacement

NOTE: Take care not to kink the hood opener cable.

  1. Remove the driver's kick panel.

  1. Remove the bolts, then remove the hood release handle (A).

  2. 6 x 1.0 mm9.3 N·m(0.95 kgf·m,6.9 lbf·ft)ABFastener Locations? : Bolt, 2
  3. Disconnect the hood opener cable (B).

  4. Install the hood release handle in the reverse order of removal, and note these items:

    • Make sure the cable is connected properly.

    • Make sure the hood opens properly.

Hood Latch Replacement

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the body or the related parts.

  1. Remove the front bulkhead cover.

  1. Remove the bolts, then remove the hood latch (A), and disconnect the hood opener cable (B).

  2. Fastener Locations? : Bolt, 3BAC6 x 1.0 mm11 N·m (1.1 kgf·m, 8 lbf·ft)
  3. For some models: Disconnect the security hood switch connector (C).

  1. Install the latch in the reverse order of removal, and note these items:

    • Apply multipurpose grease to each location on the hood latch indicated by the arrows.

    • Make sure the cable is connected properly, and the connector is plugged in properly.

    • Adjust the hood latch alignment.

    • Make sure the hood opens properly and locks securely.

  2. ?????
    Fuel Fill Door Opener Cable Replacement

    Handles and Remote Openers

    See More:

    Honda Odyssey Owners Manual > Opening/Closing the Power Sliding Doors: Door Handles
    ■ Outer handles Pull up on the outer handle towards you. The sliding door starts opening or closing. ■ Inner handles Pull it rearward to automatically open the sliding door, and pull it forward to automatically close the door. While the power sliding door is in operation, if you pull ei ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0081