Honda Odyssey Service Manual: Driver's Power Tailgate Switch Test/Replacement

Honda Odyssey Service Manual / Body / Doors and Enclosures / Trunklid/Tailgate/Cargo Doors / Driver's Power Tailgate Switch Test/Replacement

  1. Remove the driver's middle panel.

  1. Disconnect the 6P [17P] connector (A) from the driver's power tailgate switch (B).

    [ ]: With parking and back-up sensor system

    2. 1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 6 5 4 3 2 1 ABWith parking and back-up sensor systemWithout parking and back-up sensor systemCC

  1. Check for continuity between the terminals in each switch position according to the table.

    2. TerminalPosition452ReleasedPressed[15][14][5]1[3][ ]: With parking and back-up sensor system

  1. With parking and back-up sensor system. If the continuity is not as specified, replace the bulb (C) or driver's power tailgate switch.

  1. Without parking and back-up sensor system: If the continuity is not as specified, replace the bulb (A) or driver's power tailgate switch.

    2. A

  1. Install the switch in the reverse order of removal.

    Trunklid/Tailgate/Cargo Doors

    Power Tailgate Control Unit Input Test/Replacement

    See More:

    Honda Odyssey Owners Manual > Maintenance Under the Hood: Adding Engine Oil
    1. Unscrew and remove the engine oil fill cap. 2. Add oil slowly. 3. Reinstall the engine oil fill cap, and tighten it securely. 4. Wait for three minutes and recheck the engine oil dipstick. If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components. NOTICE ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0078