Honda Odyssey Service Manual: Power Tailgate Pinch Sensor Replacement

  1. Open the tailgate.

  1. Remove the clips, the screws, the bolts, and the nuts from the pinch sensor (A).

    NOTE: The illustration shows the left side pinch sensor; right side is similar.

  2. AB
  3. Disconnect the 2P connector (B) from the pinch sensor.

  4. Install in the reverse order of removal.

    Power Tailgate Drive Unit Replacement

    Tailgate Support Strut Replacement

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Third) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the rear side trim panel. Disconnect the side impact sensor (third) 4P connector (A) on the left or right side wire harness. Left side ABC Right side ABDC Remove the TORX bolt (B) using ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0122