Honda Odyssey Service Manual: Tailgate Latch Replacement

Without Power Tailgate

NOTE: Put on gloves to protect your hands.

  1. If the tailgate latch does not open by using the tailgate outer handle, remove the maintenance lid (A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.

  2. AB
  3. Remove the tailgate lower trim panel.

  1. Disconnect the tailgate release actuator/latch switch connector (A).

  2. ABFastener Locations? : Bolt, 28 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)
  3. Remove the bolts, and pull out the tailgate latch (B), then remove it.

  1. Install the latch in the reverse order of removal, and make sure the tailgate opens properly and locks securely.


With Power Tailgate

NOTE: Put on gloves to protect your hands.

  1. If the tailgate latch does not open by using the keyless entry transmitter or the tailgate outer handle, remove the maintenance lid (A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.

  2. AB
  1. Do the battery terminal disconnection procedure.

  1. Remove the tailgate lower trim panel.


  1. Remove the tailgate latch assembly (A).

    1. Disconnect the power tailgate latch connectors (B).

    1. Remove the bolts (C, D), and pull out the tailgate latch assembly.

  2. Fastener LocationsC ? : Bolt, 26 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft)ABBD8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)D ? : Bolt, 1CC
  3. Install the latch assembly in the reverse order of removal, and note these items:

    • Make sure each connector is plugged in properly.

    • Do the battery terminal reconnection procedure.

    • If necessary, reset the power tailgate control unit.

    • Make sure the tailgate opens properly and locks securely.

    Tailgate Support Strut Replacement

    Tailgate Outer Handle Switch Test/Replacement

    See More:

    Honda Odyssey Service Manual > Front Damper/Spring Removal and Installation: Installation
    Install the damper/spring (A) on to the frame. Note the direction of the damper mounting base (B) as shown. NOTE: Be careful not to damage the body. ABFRONT Loosely install the new flange nuts (A) to the top of the damper. NOTE: Install the cowl top wiper cover (B) after tightening the flange nuts ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0095