Honda Odyssey Service Manual: Rear Bumper Step Replacement

Honda Odyssey Service Manual / Body / Body Exterior / Rear Bumper Step Replacement

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the rear bumper.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the rear bumper.

  1. From inside of the rear bumper (A), release the hooks, then remove the rear bumper step (B).

  2. Fastener LocationsAB? : Hook, 17
  3. Fit all the hooks into the holes in the bumper, then push on the step until the hooks snap into place.

  4. Reinstall the rear bumper.

    Rear Bumper Reflector Replacement

    Front Bulkhead Cover Replacement

    See More:

    Honda Odyssey Service Manual > Side Windows: Front Door Glass Outer Weatherstrip Replacement
    NOTE: Put on gloves to protect your hands. Take care not to scratch the door. Remove these items: Door panel Plastic cover, as needed Power mirror From the inside of the door, slide the clips (A) on the door glass outer weatherstrip (B) to release the hooks (C) from the flanges (D) on the door. DBCA ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0065