Honda Odyssey Service Manual: Rear License Trim Replacement (With Keyless Access)

Honda Odyssey Service Manual / Body / Body Exterior / Rear License Trim Replacement (With Keyless Access)

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the tailgate.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Remove the tailgate lower trim panel.

  1. From inside the tailgate, remove the nuts.

  2. Fastener Locations? : Nut, 35 x 0.8 mm4.9 N·m(0.50 kgf·m, 3.6 lbf·ft)
  1. Remove the rear license trim (A).

    1. From inside the tailgate, detach the clips (B, C).

    1. Gently close the tailgate.

    1. Disconnect the tailgate lock switch connector (D).

    1. The grommets (E) will stay in the tailgate.

  2. Fastener LocationsBABB ? : Clip, 2C ? : Clip, 1DCEE
  3. Remove the grommets from the tailgate, then install the grommets into the clips on the rear license trim.

  1. If the clips are damaged or stress-whitened, replace them with new ones.

  1. Reconnect the tailgate lock switch connector.

  1. Hold up the rear license trim, and fit the clips into the holes in the tailgate, then push on the trim until the clips snap into place securely.

  1. Reinstall the nuts.

  1. Reinstall all removed parts.

    Front Bulkhead Cover Replacement

    Roof Molding Replacement

    See More:

    Honda Odyssey Owners Manual > Seat Belts: About Your Seat Belts
    Seat belts are the single most effective safety device because they keep you connected to the vehicle so that you can take advantage of many built-in safety features. They also help keep you from being thrown against the inside of the vehicle, against other passengers, or out of the vehicle. When wo ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0077