Honda Odyssey Service Manual: Gauge Control Module Replacement

Honda Odyssey Service Manual / Body / Driver Info & Control / Gauges / Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, retrieve the ODO data from the gauge control module with the HDS.

  1. Turn the ignition switch to LOCK (0).

  1. Remove the instrument visor.

  1. Remove the three screws from the gauge control module (A).

    2. BA

  2. Disconnect the 32P connector (B) from the gauge control module.

  3. Install the gauge control module in the reverse order of removal.

  4. Rewriting the ODO data on a new gauge control module.

    NOTE: Check the official Honda website for more information on how to write odometer information to a gauge control module that will not communicate with the HDS.

    Gauges

    Rewriting the ODO Data on a New Gauge Control Module

    See More:

    Honda Odyssey Service Manual > Ventilation Doors: Rear Air Mix Control Motor Replacement
    SRS components are located in this area. Review the SRS component locations   and the precautions and procedures   before doing repairs or service. Remove the rear HVAC unit. Disconnect the 7P connector (A) from the rear air mix control motor (B). Remove the self-tapping screws a ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0106