Clock You can adjust the time in the clock display, using the CLOCK button with the
ignition switch in ON 1. Press the CLOCK button to access the clock
adjustment mode screen. These indications are used to show how to operate the selector knob.
Rotate
Press You can also press the SETUP button to access the clock adjustment mode screen.
1. Press the SETUP button. Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted. |
Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Third) Replacement
Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the rear side trim panel. Disconnect the side impact sensor (third) 4P connector (A) on the left or right side wire harness. Left side ABC Right side ABDC Remove the TORX bolt (B) using ...