Honda Odyssey Service Manual: Detachable Console Disassembly/Reassembly

Honda Odyssey Service Manual / Body / Body Interior / Detachable Console Disassembly/Reassembly

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  • Take care not to scratch the console or the related parts.

  1. Remove the detachable console.

  1. Pull out the front beverage holder (A) to detach the clips (B, C), then remove it.

  2. Fastener LocationsB ? : Clip, 4AC ? : Clip, 3BBBBCCC(White)(Orange)
  1. Remove the front panel (A).

    1. Remove the screws.

    1. Release the hook (B), and pull out the panel to detach the clips.

  2. BAFastener Locations? : Screw, 2? : Clip, 10
  1. Remove the screws, then remove the lock (A).

  2. Fastener Locations? : Screw, 6A
  1. Pull out the rear beverage holder (A) to detach the clips (B, C), then remove it.

  2. AFastener LocationsC ? : Clip, 3B ? : Clip, 4(Orange)(White)BBBBCCC
  1. Remove the rear trim (A).

    1. Remove the screws.

    1. Pull out the trim to detach the clips.

  2. Fastener LocationsA? : Screw, 5? : Clip, 2
  1. Remove the screws, and release the projection (A), then remove the lid (B).

  2. Fastener Locations? : Screw, 6AB
  1. Remove the torque hinge (A) from the lid (B).

    1. Remove the screw.

    1. Remove the E-clip (C).

    1. Pull out the torque hinge.

  2. Fastener Location? : Screw, 1ABCReplace.
  1. Remove the screws, then remove the detachable console dampers (A).

  2. Fastener Locations? : Screw, 4AA
  1. Reassemble the detachable console in the reverse order of disassembly, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips, the hooks, and the projection into place securely.

    Second Row Center Seat-Back Armrest Beverage Holder Replacement

    Second Row Center Seat-Back Armrest Beverage Holder Replacement

    See More:

    Honda Odyssey Service Manual > Day Time Running Lights System Description: Headlight Leveling Control Unit Input Test/Replacement
    NOTE: Before testing, make sure that there is no DTCs and the combination light switch circuit is OK. Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A. Remove the bolt (A) from the headlight leveling control unit bracket. 1 2 3 4 5 6 ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0141