Honda Odyssey Service Manual: Middle Area

  1. Disconnect the following connectors:

    • SRS unit connector A

    • A/C wire harness connector (B)

    • Antenna lead connector (C)

  2. Driver's side

    AB

    Passenger's side

    C
  1. Remove the center joint bracket mounting bolts.

  2. Fastener Locations? : Bolt, 38 x 1.25 mm22 N·m(2.2 kgf·m, 16 lbf·ft)

    Driver's Side

    Passenger's Side

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Yaw Rate-Acceleration Sensor Replacement
    NOTE: Do not damage or drop the sensor as it is sensitive. Do not use power tools when replacing the sensor. Check the sensor bracket for a deformation. Turn the ignition switch to LOCK (0). Remove the center lower console. Remove the yaw rate-acceleration sensor (A). AB6 x 1.0 mm9.4 N·m (0.96 kgf ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0138