Honda Odyssey Service Manual: Passenger's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

1. Remove the passenger's dashboard undercover (A).

   1. Gently pull down the rear edge of the undercover to detach the clips (B, C).

   1. For some models: Disconnect the passenger's footwell light connector (D).

   1. Pull out the undercover to release the projections (E) from the holders (F).

2. Install the undercover in the reverse order of removal, and note these items:

   • If the clips are damaged or stress-whitened, replace them with new ones.

   • Make sure the connector is plugged in properly (for some models).

   • Make sure the projections of the undercover are installed securely to the holders.

   • Push the clips into place securely.