Honda Odyssey Service Manual: LaneWatch Camera   Inputs and Outputs

Honda Odyssey Service Manual / Body / Restraints / Restraints Control / LaneWatch Camera   Inputs and Outputs

4 5 6 1 2 3 LANEWATCH CAMERA 6P CONNECTORTerminal side of female terminals

Terminal number

Wire color

Terminal name

Description

Signal

1

WHT

BSM CAM SH

Shield for terminals No. 2, No. 3, No. 4, No. 5, and No. 6

Less than 0.2 V at all times

2

ORN

BSM COM1

Communication signal for LaneWatch camera

???

3

YEL

BSM CAM VID

Video signal for LaneWatch camera

???

4

BLK

BSM CAM VID GND

Ground for LaneWatch camera

Less than 0.2 V at all times

5

BRN

BSM COM2

Communication signal for LaneWatch camera

???

6

RED

BSM CAM +B

Power supply for the LaneWatch camera

Vehicle in ON mode: About 8 V

Vehicle in OFF mode: About 0 V

    LaneWatch Camera

    Crash Sensors

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: BSI Control Unit Removal/Installation
    Remove the left rear side trim panel. Remove the BSI control unit (A). Disconnect the BSI control unit 16P connector (B) and detach the harness clip (C). Remove the bolt. BCA9.4 N·m(0.96 kgf·m,6.9 lbf·ft) Install the BSI control unit in the reverse order of removal. ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0054