Honda Odyssey Service Manual: Yaw Rate-Acceleration Sensor Replacement

Honda Odyssey Service Manual / Body / Restraints / Restraints Control / Crash Sensors / Yaw Rate-Acceleration Sensor Replacement

NOTE:

  • Do not damage or drop the sensor as it is sensitive.

  • Do not use power tools when replacing the sensor.

  • Check the sensor bracket for a deformation.

  1. Turn the ignition switch to LOCK (0).

  1. Remove the center lower console.

  1. Remove the yaw rate-acceleration sensor (A).

    2. AB6 x 1.0 mm9.4 N·m (0.96 kgf·m, 6.9 lbf·ft)

  2. Disconnect the yaw rate-acceleration sensor 4P connector (B).

  1. Install the yaw rate-acceleration sensor in the reverse order of removal.

  1. Do the VSA sensor neutral position memorization.

    Side Impact Sensor (Third) Replacement

    Occupant Classification System

    See More:

    Honda Odyssey Service Manual > Doors: Front Door Position Adjustment (With LaneWatch)
    NOTE: Check for a flush fit with the body, then check for equal gaps between the front, rear, and bottom door edges and the body. Check that the door and body edges are parallel. If you adjust the front passenger's door, do the LaneWatch camera aiming. Place the vehicle on a firm, level surface when ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0103