NOTE: If replacing the driver's airbag after deployment, refer to Component Replacement/Inspection After Deployment for a complete list of other parts that must also be replaced. Removal
Installation NOTE: If you are replacing a deployed driver's airbag, inspect the cable reel for heat damage. If there is any damage, replace the cable reel.
|
Honda Odyssey Service Manual > Wheels/Tires: Wheel Runout Inspection
Raise and support the vehicle. Check for bent or deformed wheels. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. Front and rear wheel axial runout: Standard: Steel wheel: 0-0.7 mm (0.0-0.028 in) Aluminum wheel: 0-0.3 mm (0-0.012 in) Service limit: 2.0 mm (0.079 in ...