Honda Odyssey Service Manual: Brake Booster Replacement

Honda Odyssey Service Manual / Chassis / Brakes / Hydraulic Brakes / Brake Booster Replacement

  1. Remove the air cleaner.

  1. Remove the master cylinder.

  1. Remove the brake lines (A) from the VSA modulator-control unit (B).

  2. A22 N·m(2.2 kgf·m,16 lbf·ft)BC
  3. Disconnect the brake booster vacuum hose (C) from the brake booster.

  1. Remove the lock pin (A) and the clevis pin (B), then disconnect the clevis from the brake pedal.

  2. C8 x 1.25 mm12 N·m(1.2 kgf·m,9 lbf·ft)BA?
  3. Remove the brake booster mounting nuts (C).

  1. Remove the brake booster (A) from the engine compartment.

    NOTE:

    • Be careful not to damage the brake booster mounting surfaces and the threads on the booster studs.

    • Be careful not to bend or damage the brake lines.

    • Use a new brake booster gasket (B) during reassembly.

  2. ABReplace.
  3. Install the brake booster in the reverse order of removal, and note these items:

    • Install the master cylinder after installing the brake booster.

    • Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary.

    • Bleed the brake system.

    Hydraulic Brakes

    Brake Hose Replacement

    See More:

    Honda Odyssey Service Manual > Vertical and Horizontal Adjustment at the Rear: Special Tools Required
    KTC Trim Tool Set SOJATP2014 *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: Put on gloves to protect your hands. Take care not to scratch the door. Take care not to damage the door glass outer weatherstrip. Use the appropriate tool from the KTC trim tool set to avo ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0095