Honda Odyssey Service Manual: Brake Hose and Line Inspection

Honda Odyssey Service Manual / Chassis / Brakes / Hydraulic Brakes / Brake Hose and Line Inspection

Inspect the brake hoses for damage, deterioration, leaks, interference, and twisting.

Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.

Check for leaks at hose and line joints and connections, and retighten if necessary.

Check the master cylinder and the VSA modulator-control unit for damage and leaks.

Connection Point	Component	Connected to	Specified Torque	Note
A	Front brake caliper	Brake hose	35 N·m (3.6 kgf·m, 26 lbf·ft)	Banjo bolt
A	Front brake caliper	Bleed screw	8.5 N·m (0.87 kgf·m, 6.3 lbf·ft)
B	Rear brake caliper	Brake hose	35 N·m (3.6 kgf·m, 26 lbf·ft)	Banjo bolt
B	Rear brake caliper	Bleed screw	8.3 N·m (0.85 kgf·m, 6.1 lbf·ft)
C	Brake hose	Brake line	15 N·m (1.5 kgf·m, 11 lbf·ft)	Flare nut
D	Master cylinder	Brake line	22 N·m (2.2 kgf·m, 16 lbf·ft)	Flare nut
E	VSA modulator-control unit	Brake line (12 mm nut)	22 N·m (2.2 kgf·m, 16 lbf·ft)	Flare nut
E	VSA modulator-control unit	Brake line (10 mm nut)	15 N·m (1.5 kgf·m, 11 lbf·ft)	Flare nut

Rear

Brake Master Cylinder Inspection

See More:

Honda Odyssey Owners Manual > Checking and Maintaining Wiper Blades: Changing the Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side. 2. Press and hold the tab, then slide the blade from the wiper arm. NOTICE Avoid dropping the wiper arm; it may damage the windshield. 3. Slide the wiper blade out from its holder by pulling the tabbed end out. 4. Remove the retainer ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

0.0124