Honda Odyssey Service Manual: Steering Gearbox Removal and Installation

Honda Odyssey Service Manual / Chassis / Steering / Steering Gearbox Removal and Installation

Special Tools Required

Ball Joint Thread Protector, 12 mm 07AAF-SDAA100
Ball Joint Remover, 28 mm 07MAC-SL0A202
Subframe Adapter VSB02C000016

*Available through the Honda Tool and Equipment Program, 888-424-6857.

Note these items during removal:

Using clean solvent and a brush, wash any oil and dirt off the valve body unit, it's lines, and the end of the steering gearbox. Blow dry with compressed air.
Lower the front subframe from the body, and remove the steering gearbox through the gap produced by lowering the front subframe.

Exploded View

Steering Linkage and Gearbox Inspection

See More:

Honda Odyssey Service Manual > Alternator Overhaul: Rotor Slip Ring Test
Check for continuity between the slip rings (A): If there is continuity, go to step 15. If there is no continuity, replace the rotor assembly. ABC Check for continuity between each slip ring and the rotor (B) and the rotor shaft (C): If there is no continuity, go to step 16. If there is continuity, ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

0.0082