Honda Odyssey Service Manual: Steering Linkage and Gearbox Inspection

Honda Odyssey Service Manual / Chassis / Steering / Steering Linkage and Gearbox Inspection

STEERING GEARBOXInspect for loose mounting hardware.GEARBOX MOUNTING CUSHIONSInspect for deterioration.BOOTInspect for damage and deterioration.TIE-ROD ENDBALL JOINT BOOTInspect for damage and deterioration.TIE-ROD END LOCKNUTCheck for loose locknut.TIE-ROD END BALL JOINTInspect for faulty movementand damage.STEERING JOINTSCheck for loose joint bolt,or faulty movement.STEERING COLUMNInspect for loose mounting hardware.
    Steering Gearbox Removal and Installation

    Steering Wheel Removal and Installation

    See More:

    Honda Odyssey Service Manual > Secondary: Checking and Adjusting the Headliner/Pillar Trim Overlap
    To prevent the side curtain airbag from deploying and damaging the pillar trim (A-pillar trim, B-pillar trim, C-pillar trim, D-pillar trim), the overlap between the headliner and pillar trim must be less than 8 mm(0.31 in)   To check the overlap, do this: NOTE: This illustration shows the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0083