Honda Odyssey Service Manual: Removal

  1. Do the battery terminal disconnection procedure.

  1. Set the front wheels in the straight ahead position, then remove the driver's airbag from the steering wheel.

  1. Disconnect the cable reel subharness connector (A).

  2. B10 x 1.25 mmA
  3. Loosen the steering wheel bolt (B) three turns.

  1. Install the steering wheel puller (A) on the steering wheel (B). Free the steering wheel from the steering column shaft by turning the pressure bolt (C) of the puller.

    Note these items when removing the steering wheel:

    • Do not tap on the steering wheel or the steering column shaft when removing the steering wheel.

    • If you thread the puller bolts (D) into the wheel hub more than five threads, the bolts will hit the cable reel and damage it. To prevent this, install a pair of jam nuts five threads up on each puller bolt.

  2. ABCD
  1. Remove the steering wheel puller, then remove the steering wheel bolt (A) and the steering wheel from the steering column.

  2. A10 x 1.25 mm
    Steering Wheel Removal and Installation

    Installation

    See More:

    Honda Odyssey Service Manual > Navigation and Telematics: Navigation System Symptom Troubleshooting - Rearview camera image does not change when selecting different views
    Rearview camera image does not change when selecting different views NOTE: Check the vehicle battery condition first. You can select three different rearview camera angles for backing up. If there is no camera image on the display, go to Rearview camera image does not come on or work properly troubl ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0102