Honda Odyssey Service Manual: Removal

Honda Odyssey Service Manual / Chassis / Suspension / Rear Spring/Bump Stop Removal/Installation / Removal

  1. Raise and support the vehicle.

  1. Remove the rear wheel.

  1. Position a floor jack under lower arm B. Raise the floor jack until the suspension begins to compress.

    2. BA14 x 1.5 mmReplace.

  2. Remove the flange bolt (A) from the knuckle.

  3. Lower the floor jack gradually.

  1. Remove the spring (A), the spring mounting cushion (B), and the lower spring seat (C).

    2. ABC

  1. Remove the bump stop (A) from the body if necessary.

    2. 10 x 1.25 mmA

    Exploded View

    Installation

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
    Remove the hub bearing unit. Remove the flange nuts (A), then remove the backing plate (B) with the parking brake shoe assembly. To prevent damage to the backing plate with the parking brake shoes assembly and parking brake cable, use a short piece of wire to hang the backing plate from the undercar ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0593