Honda Odyssey Service Manual: Exploded View

Honda Odyssey Service Manual / Chassis / Suspension / Front Damper/Spring Disassembly, Inspection, and Reassembly / Exploded View

DAMPER MOUNTING WASHERCheck for deterioration.DAMPER MOUNTING BASECheck for deterioration.SELF-LOCKING NUT12 x 1.25 mm57 N·m(5.8 kgf·m, 42 lbf·ft)Replace.BUMP STOP SLEEVEBUMP STOPCheck for weakness, oil contamination, and damage.DAMPER MOUNTING BEARINGCheck for any play or roughness.UPPER SPRING SEATDAMPER UNITCheck for oil leaks, gas leaks,and smooth operation.LOWER SPRING RUBBERCheck for deterioration and damage.DAMPER SPRINGCheck for damage.DUST COVERCheck for deteriorationand damage.SELF-LOCKING NUT12 x 1.25 mm70 N·m(7.1 kgf·m, 52 lbf·ft)Replace.*1: Without damper mounting washer type*2: With damper mounting washer type*1*2

NOTE:

  • When compressing the damper spring, use a commercially available strut spring compressor (Branick MST-580A or Model 7200, or equivalent) according to the manufacturer's instructions.

  • Refer to the Exploded View as needed during the following procedure.

  • The illustrations show with damper mounting washer type.

    Front Damper/Spring Disassembly, Inspection, and Reassembly

    Disassembly

    See More:

    Honda Odyssey Service Manual > Suspension: Wheel Bearing End Play Inspection
    Raise and support the vehicle. Remove the wheels. Install suitable flat washers (A) and the wheel nuts (B). Tighten the nuts to the specified torque to hold the brake disc or the brake disc/drum securely against the hub. Front B14 x 1.5 mm127 N·m(13.0 kgf·m, 94 lbf·ft)A Rear B14 x 1.5 mm127 N·m( ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0117